Products / Detectors / High-Temperature Thermal-Neutron Diamond Detector
Product enquiries: office@cividec.at
B6-HT HIGH-TEMPERATURE THERMAL-NEUTRON DIAMOND DETECTOR
Temperature resistant
The B6-HT High-Temperature Thermal-Neutron Diamond Detector is used for the measurement of thermal neutrons in hot environments and confined spaces. The maximum operating temperature is 200°C. The detector fits into rods of 1/2 inch inner diameter. For the calibration of the detector with alpha particles, an aperture is foreseen on the rear side of the detector.
![](/W-Site/public_graphics/product18_p2.jpg)
The detector can be operated at ambient temperatures of 200°C
FEATURES
Sensor material:
sCVD diamond
Active area:
10 mm2
Neutron converter:
6LiF with 95% enrichment
Perimeter:
1/2 inch in diameter
Maximum operating temperature:
200°C
DOWNLOAD THE PRODUCT INFORMATION
![](/W-Site/public_graphics/pdf.gif)
B6-HT High-Temperature Thermal-Neutron Diamond Detector
RELEVANT PUBLICATIONS
A novel Neutron Flux Monitor based on Diamond Detectors at the Vienna TRIGA Mark II Reactor
E. Griesmayer, et al., Proc. of IAEA Conf. on Research Reactors, 16-20 November 2015, 2015
Pulse-Shape Analysis for Gamma Background Rejection in Thermal Neutron Radiation using CVD Diamond Detectors
P. Kavrigin, et al., NIMA, 795, 88-91, 2015
DOI:10.1016/j.nima.2015.05.040
The (n,α) Reaction in the s-Process Branching Point 59Ni
C. Weiss, et al., Nuclear Data Sheets, 120, 208-210, 2014
DOI:10.1016/j.nds.2014.07.048